Monitor Kits

All of the Monitors described below are available as kits for use with any Faucets, or for integration into a system. Aquest will provide design assistance and components of customized Monitors for OEM's looking to put them into an under the counter system, counter top system, Faucet filter, or even a bottle-less water cooler. Due to the variety of combinations of components and the amount of proprietary components we produce, we are not able to go into very much detail in this area. We are always very happy to discuss your specific needs on a project basis, in strict confidentiality. The following are examples of standard Monitor Kits.

Filter Monitor Kit (MK500 & MK501)
This Kit consists of a Flow Switch, LED Indicator Disc and Electronics Box. The Flow Switch has two sizes of John Guest fittings to accomodate product water tubing sizes of 1/4"O.D. and 3/8"O.D. LED Indicator Discs are also available for both the Aquest and other Faucets. The Electronics Box is common to both Faucets and the circutry is powered by AA batteries. The Flo Switch and LED Indicator Disc are connected to the Electronics Box using modular telephone plugs and jacks. There is a choice of three factory pre-set Filter Cartridge selections available.

R.O. Quality Monitor Kit (MK200 & MK201)
These Kits consist of a Flow Switch, LED Indicator Disc and Electronics Box. The Flow Switch, with integrated conductivity probes, has two sizes of John Guest fittings to accomodate product water tubing sizes of 1/4"O.D. and 3/8"O.D. LED Indicator Discs are also made for both the Aquest and other Faucets. The Electronics Box is common to both Faucets and the circutry is powered by a 9 Volt battery. TDS calibration is easily performed by turning on one of the 8 pre-set TDS switches.

SuperSmart Monitor Kit
This kit consists of a Flow Switch with integrated conductivity probes, LED Indicator Disc and Electronics Box. The 1/4" x 1/4" A-Probe and cable are hard-wired to the Electronics Box. The Flow Switch has John Guest fittings for easy splicing into the product water tubing. The inlet/outlet settings on the Flow Switch (with B-Probe) can be configured as 1/4" x 1/4", 1/4" x 3/8", or 3/8" x 3/8". LED Indicator Discs are available for both the Aquest and other Faucets. A special Tee fitting for refrigerator/icemaker installations is available.